Serfa Cabinet Locking Cremone Bolt

Serfa
SKU:
8247/2555
$64.99

This unusual cremone bolt is used to lock a cabinet door. The entire cremone bolt is concealed except for the keyhole on the exterior of the door.

See supplemental picture of a similar cremone used on a wardrobe door in Marie Antoinette's house.

Two turns of the included key extend the rods 11mm (7/16") in each direction.

Made of lightweight plain steel.

Provided with 2 end guides, 2 surface strikes, 2 mortice strikes, one 1500mm rod, one key, cremone bolt mechanism, cremone bolt cover and various screws and nails.

Dimensions:
 > Rod measures 3/8" wide and 3/16" thick by 1500mm long. Rod is cut into 2 lengths to suit up to 61" opening.
 > Mechanism measures 4-5/16" high x 15/16" wide x 7/16" thick.
 > End guides are 1-1/4" wide x 1-1/8" tall.
 > Surface strikes measure 15/16" x 3/8".
 > Mortise strikes measure 1-1/4" x 9/16".
 > Key measures 3" long. Suitable for door up to 1-1/4" thick.

Tamper resistant screws require a #0 square drive bit to install.

Exterior keyhole trim not provided.

Made in France.

(No reviews yet)
Current Stock:
Adding to cart… The item has been added

This unusual cremone bolt is used to lock a cabinet door. The entire cremone bolt is concealed except for the keyhole on the exterior of the door.

See supplemental picture of a similar cremone used on a wardrobe door in Marie Antoinette's house.

Two turns of the included key extend the rods 11mm (7/16") in each direction.

Made of lightweight plain steel.

Provided with 2 end guides, 2 surface strikes, 2 mortice strikes, one 1500mm rod, one key, cremone bolt mechanism, cremone bolt cover and various screws and nails.

Dimensions:
 > Rod measures 3/8" wide and 3/16" thick by 1500mm long. Rod is cut into 2 lengths to suit up to 61" opening.
 > Mechanism measures 4-5/16" high x 15/16" wide x 7/16" thick.
 > End guides are 1-1/4" wide x 1-1/8" tall.
 > Surface strikes measure 15/16" x 3/8".
 > Mortise strikes measure 1-1/4" x 9/16".
 > Key measures 3" long. Suitable for door up to 1-1/4" thick.

Tamper resistant screws require a #0 square drive bit to install.

Exterior keyhole trim not provided.

Made in France.